A study on roughness of the micro-end-milled surface produced by a miniatured machine tool

W. Wang; S. H. Kweon; S. H. Yang

doi:10.1016/j.jmatprotec.2005.02.141

A study on roughness of the micro-end-milled surface produced by a miniatured machine tool

W. Wang, S. H. Kweon, S. H. Yang

School of Mechanical Engineering

Kyungpook National University

Research output: Contribution to journal › Article › peer-review

144 Scopus citations

Abstract

In this paper, the influence of micro-end-milling cutting conditions on roughness of a surface-machined using a miniaturized machine tool is presented. The cutting parameters considered are spindle speed, feed rate, depth of cut and tool diameter. Experiments are design to determine which parameters are most influential on surface roughness. Statistical methods are used for finding out the optimal values of milling parameters. The influence of each milling parameter in micro-end-milling process is analyzed and the magnitude of parameters is determined. The interaction effect of parameters to surface roughness is discussed and the mathematical model for micro-end-milling is established.

Original language	English
Pages (from-to)	702-708
Number of pages	7
Journal	Journal of Materials Processing Technology
Volume	162-163
Issue number	SPEC. ISS.
DOIs	https://doi.org/10.1016/j.jmatprotec.2005.02.141
State	Published - 15 May 2005

Keywords

Experimental design
Micro-end-milling
Miniaturized machine tool
Response surface methodology
Surface roughness

Access to Document

10.1016/j.jmatprotec.2005.02.141

Cite this

@article{10ff2b2ae8ad46c3808e405413e4cb6e,

title = "A study on roughness of the micro-end-milled surface produced by a miniatured machine tool",

abstract = "In this paper, the influence of micro-end-milling cutting conditions on roughness of a surface-machined using a miniaturized machine tool is presented. The cutting parameters considered are spindle speed, feed rate, depth of cut and tool diameter. Experiments are design to determine which parameters are most influential on surface roughness. Statistical methods are used for finding out the optimal values of milling parameters. The influence of each milling parameter in micro-end-milling process is analyzed and the magnitude of parameters is determined. The interaction effect of parameters to surface roughness is discussed and the mathematical model for micro-end-milling is established.",

keywords = "Experimental design, Micro-end-milling, Miniaturized machine tool, Response surface methodology, Surface roughness",

author = "W. Wang and Kweon, \{S. H.\} and Yang, \{S. H.\}",

year = "2005",

month = may,

day = "15",

doi = "10.1016/j.jmatprotec.2005.02.141",

language = "English",

volume = "162-163",

pages = "702--708",

journal = "Journal of Materials Processing Technology",

issn = "0924-0136",

publisher = "Elsevier B.V.",

number = "SPEC. ISS.",

}

TY - JOUR

T1 - A study on roughness of the micro-end-milled surface produced by a miniatured machine tool

AU - Wang, W.

AU - Kweon, S. H.

AU - Yang, S. H.

PY - 2005/5/15

Y1 - 2005/5/15

N2 - In this paper, the influence of micro-end-milling cutting conditions on roughness of a surface-machined using a miniaturized machine tool is presented. The cutting parameters considered are spindle speed, feed rate, depth of cut and tool diameter. Experiments are design to determine which parameters are most influential on surface roughness. Statistical methods are used for finding out the optimal values of milling parameters. The influence of each milling parameter in micro-end-milling process is analyzed and the magnitude of parameters is determined. The interaction effect of parameters to surface roughness is discussed and the mathematical model for micro-end-milling is established.

AB - In this paper, the influence of micro-end-milling cutting conditions on roughness of a surface-machined using a miniaturized machine tool is presented. The cutting parameters considered are spindle speed, feed rate, depth of cut and tool diameter. Experiments are design to determine which parameters are most influential on surface roughness. Statistical methods are used for finding out the optimal values of milling parameters. The influence of each milling parameter in micro-end-milling process is analyzed and the magnitude of parameters is determined. The interaction effect of parameters to surface roughness is discussed and the mathematical model for micro-end-milling is established.

KW - Experimental design

KW - Micro-end-milling

KW - Miniaturized machine tool

KW - Response surface methodology

KW - Surface roughness

UR - https://www.scopus.com/pages/publications/17844398012

U2 - 10.1016/j.jmatprotec.2005.02.141

DO - 10.1016/j.jmatprotec.2005.02.141

M3 - Article

AN - SCOPUS:17844398012

SN - 0924-0136

VL - 162-163

SP - 702

EP - 708

JO - Journal of Materials Processing Technology

JF - Journal of Materials Processing Technology

IS - SPEC. ISS.

ER -

A study on roughness of the micro-end-milled surface produced by a miniatured machine tool

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this