@inproceedings{7cf6ea57f70b4a72a74573f5cca5afd2,
title = "A study on the characteristics of electrode fabrication for micro-hole making",
abstract = "Micro-EDM technology for the manufacture of miniature parts is used to make a micro hole. In this study, an electrode shaping method by using previously machined hole is introduced to obtain an optimal hole-making condition. Key factors such as applied voltage, capacitance, feedrate, and hole-dimension have an influence on the fabricating error of electrode shaping, which are taper ratio of a hole, electrode form accuracy, and electrode surface. Therefore, the optimal fabricating of electrode shaping investigates from various experiments. Results from experiments, it could minimize the electrode fabricating error as voltage increases, and also applied feedrate and capacitance decreases.",
keywords = "EDM error, Micro electrode, Micro hole, Micro-EDM, Micro-EDM characteristics",
author = "Lee, {Ju Kyoung} and Lee, {Jong Hang} and Park, {Cheol Woo}",
year = "2007",
language = "English",
series = "Proceedings of the 15th International Symposium on Electromachining, ISEM 2007",
publisher = "Industrial and Management Systems Engineering",
pages = "227--230",
editor = "Sundaram, {Murali Meenakshi} and K.P. Rajurkar and Resnick, {Ralph L.}",
booktitle = "Proceedings of the 15th International Symposium on Electromachining, ISEM 2007",
note = "15th International Symposium on Electromachining, ISEM 2007 ; Conference date: 23-04-2007 Through 27-04-2007",
}