Analysis on discharge modes in AC-PDP with sustain gap of 200 μm

Jae Young Kim; Soo Kwan Jang; Ki Hyung Park; Choon Sang Park; Heung Sik Tae

Analysis on discharge modes in AC-PDP with sustain gap of 200 μm

Jae Young Kim, Soo Kwan Jang, Ki Hyung Park, Choon Sang Park, Heung Sik Tae

School of Electronics Engineering

Kyungpook National University

Research output: Contribution to journal › Conference article › peer-review

Abstract

The Vt close curve measurement shows that there exists the X-Y discharge contour in the large sustain gap of 200 μm (> a barrier rib height of 125 μm). This indicates that there are two different discharge modes: one mode is that the discharge is produced only between the sustain electrodes, and the other mode is that the discharge is initiated between the address and sustain electrodes, thus producing the main discharge between the sustain electrodes. The two discharge modes are confirmed and analyzed based on Vt close curve movement on cell voltage plane after the strong discharge. The two discharge modes show the different discharge characteristics such as a sustainable region, Vt close curve behavior, and luminance. Furthermore, it is observed that the discharge characteristics induced by applying the short address pulse are different according the discharge mode.

Original language	English
Pages (from-to)	268-271
Number of pages	4
Journal	SID Conference Record of the International Display Research Conference
Volume	2005
State	Published - 2005
Event	25th Internatioanl Display Research Conference, EURODISPLAY 2005 - Edinburgh, SCO, United Kingdom Duration: 20 Sep 2005 → 22 Sep 2005

Cite this

@article{6aa89c37ae0c44fbaec97bc9ecfc4419,

title = "Analysis on discharge modes in AC-PDP with sustain gap of 200 μm",

abstract = "The Vt close curve measurement shows that there exists the X-Y discharge contour in the large sustain gap of 200 μm (> a barrier rib height of 125 μm). This indicates that there are two different discharge modes: one mode is that the discharge is produced only between the sustain electrodes, and the other mode is that the discharge is initiated between the address and sustain electrodes, thus producing the main discharge between the sustain electrodes. The two discharge modes are confirmed and analyzed based on Vt close curve movement on cell voltage plane after the strong discharge. The two discharge modes show the different discharge characteristics such as a sustainable region, Vt close curve behavior, and luminance. Furthermore, it is observed that the discharge characteristics induced by applying the short address pulse are different according the discharge mode.",

author = "Kim, {Jae Young} and Jang, {Soo Kwan} and Park, {Ki Hyung} and Park, {Choon Sang} and Tae, {Heung Sik}",

year = "2005",

language = "English",

volume = "2005",

pages = "268--271",

journal = "SID Conference Record of the International Display Research Conference",

issn = "1083-1312",

publisher = "Society for Information Display",

note = "25th Internatioanl Display Research Conference, EURODISPLAY 2005 ; Conference date: 20-09-2005 Through 22-09-2005",

}

TY - JOUR

T1 - Analysis on discharge modes in AC-PDP with sustain gap of 200 μm

AU - Kim, Jae Young

AU - Jang, Soo Kwan

AU - Park, Ki Hyung

AU - Park, Choon Sang

AU - Tae, Heung Sik

PY - 2005

Y1 - 2005

N2 - The Vt close curve measurement shows that there exists the X-Y discharge contour in the large sustain gap of 200 μm (> a barrier rib height of 125 μm). This indicates that there are two different discharge modes: one mode is that the discharge is produced only between the sustain electrodes, and the other mode is that the discharge is initiated between the address and sustain electrodes, thus producing the main discharge between the sustain electrodes. The two discharge modes are confirmed and analyzed based on Vt close curve movement on cell voltage plane after the strong discharge. The two discharge modes show the different discharge characteristics such as a sustainable region, Vt close curve behavior, and luminance. Furthermore, it is observed that the discharge characteristics induced by applying the short address pulse are different according the discharge mode.

AB - The Vt close curve measurement shows that there exists the X-Y discharge contour in the large sustain gap of 200 μm (> a barrier rib height of 125 μm). This indicates that there are two different discharge modes: one mode is that the discharge is produced only between the sustain electrodes, and the other mode is that the discharge is initiated between the address and sustain electrodes, thus producing the main discharge between the sustain electrodes. The two discharge modes are confirmed and analyzed based on Vt close curve movement on cell voltage plane after the strong discharge. The two discharge modes show the different discharge characteristics such as a sustainable region, Vt close curve behavior, and luminance. Furthermore, it is observed that the discharge characteristics induced by applying the short address pulse are different according the discharge mode.

UR - http://www.scopus.com/inward/record.url?scp=33846632760&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:33846632760

SN - 1083-1312

VL - 2005

SP - 268

EP - 271

JO - SID Conference Record of the International Display Research Conference

JF - SID Conference Record of the International Display Research Conference

T2 - 25th Internatioanl Display Research Conference, EURODISPLAY 2005

Y2 - 20 September 2005 through 22 September 2005

ER -

Analysis on discharge modes in AC-PDP with sustain gap of 200 μm

Abstract

Other files and links

Fingerprint

Cite this