Capacitive property studies of electrochemically synthesized Co3O4 and Mn3O4 on inexpensive stainless steel current collector for supercapacitor application

Nagesh Maile, S. K. Shinde, S. S. Patil, D. Y. Kim, A. V. Fulari, D. S. Lee, V. J. Fulari

Research output: Contribution to journalArticlepeer-review

30 Scopus citations

Abstract

Co3O4 and Mn3O4 have been considered as pseudocapacitive nanomaterials that are suitable for use in supercapacitors (SCs) because of the apparent role of the surface capacitive current and diffusive intercalation current in their electrical charge storage mechanism. This paper presents a study of the pseudocapacitive current distribution in Co3O4 and Mn3O4 thin films prepared by a simple low-temperature electrodeposition method for binder-free synthesis on inexpensive stainless steel current collectors for cost-effective SC application. After preparation, the thin films were investigated by using various characterization techniques. However, in a single-electrode SC test performed with Co3O4, both surface capacitive and diffusive intercalation currents contributed to the total current during a charging voltammogram scan, with the diffusive current dominating in the oxidation potential region. By contrast, in Mn3O4, a relatively small capacitive current contributed to the total current in a charging voltammogram scan. The pseudocapacitive Co3O4 and Mn3O4 thin films exhibited maximum specific capacitances of 131 and 109 F g−1 in 2 M KOH and maximum specific discharge capacities of 14.8 and 33.0 mAh g−1, respectively, which showed their potential for use in energy storage devices.

Original languageEnglish
Pages (from-to)14640-14649
Number of pages10
JournalCeramics International
Volume46
Issue number10
DOIs
StatePublished - Jul 2020

Keywords

  • CoO
  • Electrodeposition
  • MnO
  • Pseudocapacitive material
  • Stainless steel substrate
  • Supercapacitor

Fingerprint

Dive into the research topics of 'Capacitive property studies of electrochemically synthesized Co3O4 and Mn3O4 on inexpensive stainless steel current collector for supercapacitor application'. Together they form a unique fingerprint.

Cite this