Comparison of the effects of multiple injection strategy on the emissions between moderate and heavy EGR rate conditions: Part 2-post injections

To draw a comparison of the effect of multiple injection strategy on the engine-out emissions under two different EGR rate conditions, the effect of pilot injection on emissions and combustion was evaluated and discussed in part 1. Thus, in the second research as part 2, the effects of post injection on the engine-out emissions were systemically evaluated for two different EGR rate conditions (30 % and 60 %). Since the behavior of diesel combustion is significantly different as EGR rate is changed, the characteristics of post injection was different between two EGR rate conditions. This research was investigated as varying injection parameters such as the timing and quantity of the post injection. The results show that the close post injection with injection interval as 10 degree has the potential to reduce PM emission, regardless of EGR rate. However, the reason of reduction of PM emission is different for each case. For a moderate EGR rate condition, close post injection with interval 10 degree enhances the fuel at bottom of bowl. Thus, the distribution of fuel can be improved. On the other hand, for a heavy EGR rate condition, close post injection with interval 10 degree has the charge cooling effect to prolong the ignition delay, rather than well-matched injection targeting. Especially, there is an effect to oxidize PM emission under moderate EGR rate condition as post injection is applied. However, post injection for late cycle of combustion under heavy EGR rate condition does not oxidize PM emission due to low oxygen concentration (∼ 10%).