Current-Fed Quasi-Z-Source Full-Bridge Isolated DC-DC Converter

Tien The Nguyen; Honnyong Cha; Heung Geun Kim

doi:10.1109/TIE.2020.3047008

Current-Fed Quasi-Z-Source Full-Bridge Isolated DC-DC Converter

Tien The Nguyen
, Honnyong Cha
, Heung Geun Kim

Kyungpook National University

Research output: Contribution to journal › Article › peer-review

19 Scopus citations

Abstract

This article presents current-fed (CF) full-bridge (FB) isolated dc-dc converter using quasi-Z-source network. Owing to its inherent buck-boost and clamping function, the proposed converter can effectively eliminate start-up and switch voltage overshoot problems. In addition, when compared with the conventional CF-FB converter with active clamp, switch current stress is much reduced and less active switches are required. Operation principles of the proposed converter are analyzed in detail. The simulation and experimental results with 1-kW prototype are also provided to verify theoretical analysis.

Original language	English
Article number	9311702
Pages (from-to)	12046-12057
Number of pages	12
Journal	IEEE Transactions on Industrial Electronics
Volume	68
Issue number	12
DOIs	https://doi.org/10.1109/TIE.2020.3047008
State	Published - Dec 2021

Keywords

Active clamp
buck-boost
current-fed (CF)
dc-dc converter
isolated
quasi-z-source (qZS)
reliability
start-up
voltage overshoot

Access to Document

10.1109/TIE.2020.3047008

Cite this

@article{13e2df9bf8634e0a89b0dfb5b11c86d4,

title = "Current-Fed Quasi-Z-Source Full-Bridge Isolated DC-DC Converter",

abstract = "This article presents current-fed (CF) full-bridge (FB) isolated dc-dc converter using quasi-Z-source network. Owing to its inherent buck-boost and clamping function, the proposed converter can effectively eliminate start-up and switch voltage overshoot problems. In addition, when compared with the conventional CF-FB converter with active clamp, switch current stress is much reduced and less active switches are required. Operation principles of the proposed converter are analyzed in detail. The simulation and experimental results with 1-kW prototype are also provided to verify theoretical analysis.",

keywords = "Active clamp, buck-boost, current-fed (CF), dc-dc converter, isolated, quasi-z-source (qZS), reliability, start-up, voltage overshoot",

author = "Nguyen, \{Tien The\} and Honnyong Cha and Kim, \{Heung Geun\}",

note = "Publisher Copyright: {\textcopyright} 1982-2012 IEEE.",

year = "2021",

month = dec,

doi = "10.1109/TIE.2020.3047008",

language = "English",

volume = "68",

pages = "12046--12057",

journal = "IEEE Transactions on Industrial Electronics",

issn = "0278-0046",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "12",

}

TY - JOUR

T1 - Current-Fed Quasi-Z-Source Full-Bridge Isolated DC-DC Converter

AU - Nguyen, Tien The

AU - Cha, Honnyong

AU - Kim, Heung Geun

PY - 2021/12

Y1 - 2021/12

N2 - This article presents current-fed (CF) full-bridge (FB) isolated dc-dc converter using quasi-Z-source network. Owing to its inherent buck-boost and clamping function, the proposed converter can effectively eliminate start-up and switch voltage overshoot problems. In addition, when compared with the conventional CF-FB converter with active clamp, switch current stress is much reduced and less active switches are required. Operation principles of the proposed converter are analyzed in detail. The simulation and experimental results with 1-kW prototype are also provided to verify theoretical analysis.

AB - This article presents current-fed (CF) full-bridge (FB) isolated dc-dc converter using quasi-Z-source network. Owing to its inherent buck-boost and clamping function, the proposed converter can effectively eliminate start-up and switch voltage overshoot problems. In addition, when compared with the conventional CF-FB converter with active clamp, switch current stress is much reduced and less active switches are required. Operation principles of the proposed converter are analyzed in detail. The simulation and experimental results with 1-kW prototype are also provided to verify theoretical analysis.

KW - Active clamp

KW - buck-boost

KW - current-fed (CF)

KW - dc-dc converter

KW - isolated

KW - quasi-z-source (qZS)

KW - reliability

KW - start-up

KW - voltage overshoot

UR - https://www.scopus.com/pages/publications/85099084540

U2 - 10.1109/TIE.2020.3047008

DO - 10.1109/TIE.2020.3047008

M3 - Article

AN - SCOPUS:85099084540

SN - 0278-0046

VL - 68

SP - 12046

EP - 12057

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

IS - 12

M1 - 9311702

ER -

Current-Fed Quasi-Z-Source Full-Bridge Isolated DC-DC Converter

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this