Effect of the surface roughness on the shear strength of granular materials in ring shear tests

Surface roughness plays an important role in estimating the shear strength of granular materials. A series of ring shear tests with different surface roughnesses (i.e., smooth and rough surfaces) were performed. A large-sized ring shear device, which is applicable for fine- and coarse-grained sediments, was developed to examine the shear strength of large particle sizes (i.e., commercial gravels with a mean grain size of 6 mm). In terms of surface roughness, the drainageand shear-velocity-dependent shear strengths of the granular materials were examined. In this study, different shear velocities of 0.1, 0.5, and 1 mm/s were applied under drained and undrained conditions. The test results clearly show that shear stress is affected by drainage, shear velocity, and surface roughness. In particular, a typical strain-hardening behavior is exhibited regardless of the drainage and shear velocity condition. The measured shear strength obtained from both drained and undrained conditions increased with increasing shear velocity. All tests showed a large fragmentation using rough surfaces compared to the smooth surfaces of the device. The grain crushing was significant during shearing, even when normal stress was not applied. For a given shear velocity, surface roughness is an important feature in determining the shear strength of granular materials.