Efficiency improvement characteristics under exhaust method and Xe gas contents in AC plasma display panel

Tae Joung Kweon; Eun Young Jung; Choon Sang Park; Jae Nyeong Heo; Hyung Dal Park; Jae Hyun Kim; Heung Sik Tae; Eun Gi Heo

Efficiency improvement characteristics under exhaust method and Xe gas contents in AC plasma display panel

Tae Joung Kweon, Eun Young Jung, Choon Sang Park, Jae Nyeong Heo, Hyung Dal Park, Jae Hyun Kim, Heung Sik Tae, Eun Gi Heo

School of Electronics Engineering

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

Abstract

In this paper, two experiments were performed. One is that a Xe gas content is changed to increase luminance, the other is that an exhaust method is changed to decrease discharge voltage. As a result, if a Xe gas content was increased, discharge efficiency was improved. But, discharge voltage was increased. In order to improve this discharge voltage rise, high temperature exhaust method was employed by raising 20 °C than conventional exhaust temperature. Through this, the electrical and optical characteristics could be improved by reducing absorbed impurity gas including an organic ingredient in panel. If a Xe gas content was changed from 11% to 25% discharge efficiency was improved about 30%or more, and it was improved about 6% by high temperature exhaust method than conventional temperature exhaust method.

Original language	English
Pages	939-942
Number of pages	4
State	Published - 2009
Event	16th International Display Workshops, IDW '09 - Miyazaki, Japan Duration: 9 Dec 2009 → 11 Dec 2009

Conference

Conference	16th International Display Workshops, IDW '09
Country/Territory	Japan
City	Miyazaki
Period	9/12/09 → 11/12/09

Cite this

@conference{5bc851bdbf0d4208bcdec19625520b7c,

title = "Efficiency improvement characteristics under exhaust method and Xe gas contents in AC plasma display panel",

abstract = "In this paper, two experiments were performed. One is that a Xe gas content is changed to increase luminance, the other is that an exhaust method is changed to decrease discharge voltage. As a result, if a Xe gas content was increased, discharge efficiency was improved. But, discharge voltage was increased. In order to improve this discharge voltage rise, high temperature exhaust method was employed by raising 20 °C than conventional exhaust temperature. Through this, the electrical and optical characteristics could be improved by reducing absorbed impurity gas including an organic ingredient in panel. If a Xe gas content was changed from 11% to 25% discharge efficiency was improved about 30%or more, and it was improved about 6% by high temperature exhaust method than conventional temperature exhaust method.",

author = "Kweon, {Tae Joung} and Jung, {Eun Young} and Park, {Choon Sang} and Heo, {Jae Nyeong} and Park, {Hyung Dal} and Kim, {Jae Hyun} and Tae, {Heung Sik} and Heo, {Eun Gi}",

year = "2009",

language = "English",

pages = "939--942",

note = "16th International Display Workshops, IDW '09 ; Conference date: 09-12-2009 Through 11-12-2009",

}

TY - CONF

T1 - Efficiency improvement characteristics under exhaust method and Xe gas contents in AC plasma display panel

AU - Kweon, Tae Joung

AU - Jung, Eun Young

AU - Park, Choon Sang

AU - Heo, Jae Nyeong

AU - Park, Hyung Dal

AU - Kim, Jae Hyun

AU - Tae, Heung Sik

AU - Heo, Eun Gi

PY - 2009

Y1 - 2009

N2 - In this paper, two experiments were performed. One is that a Xe gas content is changed to increase luminance, the other is that an exhaust method is changed to decrease discharge voltage. As a result, if a Xe gas content was increased, discharge efficiency was improved. But, discharge voltage was increased. In order to improve this discharge voltage rise, high temperature exhaust method was employed by raising 20 °C than conventional exhaust temperature. Through this, the electrical and optical characteristics could be improved by reducing absorbed impurity gas including an organic ingredient in panel. If a Xe gas content was changed from 11% to 25% discharge efficiency was improved about 30%or more, and it was improved about 6% by high temperature exhaust method than conventional temperature exhaust method.

AB - In this paper, two experiments were performed. One is that a Xe gas content is changed to increase luminance, the other is that an exhaust method is changed to decrease discharge voltage. As a result, if a Xe gas content was increased, discharge efficiency was improved. But, discharge voltage was increased. In order to improve this discharge voltage rise, high temperature exhaust method was employed by raising 20 °C than conventional exhaust temperature. Through this, the electrical and optical characteristics could be improved by reducing absorbed impurity gas including an organic ingredient in panel. If a Xe gas content was changed from 11% to 25% discharge efficiency was improved about 30%or more, and it was improved about 6% by high temperature exhaust method than conventional temperature exhaust method.

UR - http://www.scopus.com/inward/record.url?scp=77954165973&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:77954165973

SP - 939

EP - 942

T2 - 16th International Display Workshops, IDW '09

Y2 - 9 December 2009 through 11 December 2009

ER -

Efficiency improvement characteristics under exhaust method and Xe gas contents in AC plasma display panel

Abstract

Conference

Other files and links

Fingerprint

Cite this