Skip to main navigation Skip to search Skip to main content

Fast Pyrolysis of Tea Bush, Walnut Shell, and Pine Cone Mixture: Effect of Pyrolysis Parameters on Pyrolysis Crop Yields

  • Turgay Kar
  • , Ömer Kaygusuz
  • , Mükrimin Şevket Güney
  • , Erdem Cuce
  • , Sedat Keleş
  • , Saboor Shaik
  • , Abdulhameed Babatunde Owolabi
  • , Benyoh Emmanuel Kigha Nsafon
  • , Johnson Makinwa Ogunsua
  • , Jeung Soo Huh
  • Karadeniz Technical University
  • Giresun Universitesi
  • Recep Tayyip Erdogan University
  • Birmingham City University
  • Vellore Institute of Technology
  • Kyungpook National University
  • Nigerian Stored Products Research Institute

Research output: Contribution to journalArticlepeer-review

7 Scopus citations

Abstract

Liquid products obtained by the fast pyrolysis process applied to biomass can be used as chemical raw materials and liquid fuels. In this study, tea bush, walnut shell, and pine cone samples selected as biomass samples were obtained from Trabzon and Rize provinces in the Eastern Black Sea Region and used. When considered in terms of our region, the available biomass waste samples are easy to access and have a high potential in quantity. To employ them in the experimental investigation, these biomass samples were first ground, sieved to a particle size of 1.0 mm, and mixed. A fast pyrolysis process was applied to this obtained biomass mixture in a fixed-bed pyrolysis reactor. The effects of temperature, heating rate, and nitrogen flow rate on the product yields of the fast pyrolysis technique used on the biomass mixture are examined. A constant particle size of 1.0 mm, temperatures of 300, 400, 500, 600, and 750 °C, heating rates of 100, 250, 400, and 600 °C.min−1, and flow rates of 50, 100, 200, and 300 cm3.min−1 were used in tests on fast pyrolysis. The studies showed the 500 °C pyrolysis temperature, 100 °C min−1 heating rate, and 50 cm3.min−1 nitrogen flow rate gave the maximum liquid product yield. The liquid product generated under the most compelling circumstances is analyzed to determine moisture, calorific value, fixed carbon, ash, raw coke, and volatile matter. Additionally, the crude bio-oil heating value, measured at 5900 cal/g and produced under the most favorable pyrolysis circumstances, rose by around 40% compared to its starting material. The liquid product obtained from rapid pyrolysis experiments can be used as liquid fuel. The evaluation of the potential of chemical raw materials can be a subject of research in a different discipline since there are many chemical raw materials (glycerine, furfurals, cellulose and derivatives, carbonaceous materials, and so forth) in fast pyrolysis liquids.

Original languageEnglish
Article number13718
JournalSustainability (Switzerland)
Volume15
Issue number18
DOIs
StatePublished - Sep 2023

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • bio-oil
  • biomass
  • fast pyrolysis
  • heating rate
  • pine cone
  • tea bush
  • walnut shell

Fingerprint

Dive into the research topics of 'Fast Pyrolysis of Tea Bush, Walnut Shell, and Pine Cone Mixture: Effect of Pyrolysis Parameters on Pyrolysis Crop Yields'. Together they form a unique fingerprint.

Cite this