TY - JOUR
T1 - In-Depth Analysis on the Fabry-Perot Effect of Cs2AgBiBr6Double Perovskite-Based Solar Cells via Optical Path Length Modulation
AU - Seo, Kyeong Ho
AU - Feng, Junhao
AU - Bae, Jin Hyuk
N1 - Publisher Copyright:
© 2024 Kyeong-Ho Seo et al.
PY - 2024
Y1 - 2024
N2 - Herein, the Fabry-Perot (F-P) interference of cesium silver bismuth bromide (Cs2AgBiBr6) double perovskite solar cells has been analyzed by modulating the optical path length of each layer step by step using the finite-difference time-domain (FDTD) method. The study was performed pass through three main steps. In step 1, for the fluorine-doped tin oxide (FTO)/Cs2AgBiBr6 double perovskite/gold (Au) architecture, we increased the absorption layer thickness from 150 to 600 nm at intervals of 150 nm and then predicted the optical performance including the absorption and reflection. In step 2, titanium dioxide (TiO2) layer was added between FTO electrode and Cs2AgBiBr6 double perovskite and then scaled from 20 to 200 nm at intervals of 20 nm. In the analysis process, short-circuit current density (Jsc) repeatedly fell and rose as the TiO2 layer thickness increased, and when TiO2 layer thickness is 100 nm, Jsc showed the highest value of 13.91 mA/cm2. In step 3, by applying a spiro-OMeTAD layer between the Cs2AgBiBr6 double perovskite absorption layer and Au electrode, the Jsc showed a continuous increase with slight decrease as the spiro-OMeTAD layer thickness increased from 110 to 200 nm, and when the spiro-OMeTAD layer thickness was 200 nm, Jscwas calculated as 14.57 mA/cm2, which is the highest value in the range. In the case of the optimal condition of full structure device, the Fabry-Perot resonance peaks were discovered at 477, 520, 572, 659, and 778 nm five wavelength regions, and the influence of the Fabry-Perot resonance on the generation rate inside the absorption layer on the 520, 572, and 659 nm monochromatic wavelength light was analyzed according to the position in the device. Our study approaches the Cs2AgBiBr6 double perovskite solar cell from an F-P cavity perspective and shows the light trapping phenomenon of the device according to the optical path length modulation.
AB - Herein, the Fabry-Perot (F-P) interference of cesium silver bismuth bromide (Cs2AgBiBr6) double perovskite solar cells has been analyzed by modulating the optical path length of each layer step by step using the finite-difference time-domain (FDTD) method. The study was performed pass through three main steps. In step 1, for the fluorine-doped tin oxide (FTO)/Cs2AgBiBr6 double perovskite/gold (Au) architecture, we increased the absorption layer thickness from 150 to 600 nm at intervals of 150 nm and then predicted the optical performance including the absorption and reflection. In step 2, titanium dioxide (TiO2) layer was added between FTO electrode and Cs2AgBiBr6 double perovskite and then scaled from 20 to 200 nm at intervals of 20 nm. In the analysis process, short-circuit current density (Jsc) repeatedly fell and rose as the TiO2 layer thickness increased, and when TiO2 layer thickness is 100 nm, Jsc showed the highest value of 13.91 mA/cm2. In step 3, by applying a spiro-OMeTAD layer between the Cs2AgBiBr6 double perovskite absorption layer and Au electrode, the Jsc showed a continuous increase with slight decrease as the spiro-OMeTAD layer thickness increased from 110 to 200 nm, and when the spiro-OMeTAD layer thickness was 200 nm, Jscwas calculated as 14.57 mA/cm2, which is the highest value in the range. In the case of the optimal condition of full structure device, the Fabry-Perot resonance peaks were discovered at 477, 520, 572, 659, and 778 nm five wavelength regions, and the influence of the Fabry-Perot resonance on the generation rate inside the absorption layer on the 520, 572, and 659 nm monochromatic wavelength light was analyzed according to the position in the device. Our study approaches the Cs2AgBiBr6 double perovskite solar cell from an F-P cavity perspective and shows the light trapping phenomenon of the device according to the optical path length modulation.
UR - http://www.scopus.com/inward/record.url?scp=85185531924&partnerID=8YFLogxK
U2 - 10.1155/2024/9935893
DO - 10.1155/2024/9935893
M3 - Article
AN - SCOPUS:85185531924
SN - 0363-907X
VL - 2024
JO - International Journal of Energy Research
JF - International Journal of Energy Research
M1 - 9935893
ER -