Model-based controller design for a plastic film extrusion process

Sung Ho Hur; Reza Katebi; Andrew Taylor

doi:10.1109/CCA.2010.5611280

Model-based controller design for a plastic film extrusion process

Sung Ho Hur
, Reza Katebi
, Andrew Taylor

School of Electronics Engineering

University of Strathclyde
DuPont

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This paper reports the development and implementation of a model-based cross-directional controller for plastic film extrusion and other web-forming processes. The controller design has a similar structure to that of internal model control (IMC) with the addition of an observer whose gain is designed to minimise process and model mis-match. The observer gain is obtained by solving a multi-objective optimisation through the application of a genetic algorithm and simulation results are presented in this paper demonstrating improvements that can be achieved by the proposed controller over two existing CD controllers.

Original language	English
Title of host publication	2010 IEEE International Conference on Control Applications, CCA 2010
Pages	944-949
Number of pages	6
DOIs	https://doi.org/10.1109/CCA.2010.5611280
State	Published - 2010
Event	2010 IEEE International Conference on Control Applications, CCA 2010 - Yokohama, Japan Duration: 8 Sep 2010 → 10 Sep 2010

Publication series

Name	Proceedings of the IEEE International Conference on Control Applications

Conference

Conference	2010 IEEE International Conference on Control Applications, CCA 2010
Country/Territory	Japan
City	Yokohama
Period	8/09/10 → 10/09/10

Access to Document

10.1109/CCA.2010.5611280

Cite this

@inproceedings{9bd75f03305e42f7a9e4812a3d9e1b9b,

title = "Model-based controller design for a plastic film extrusion process",

abstract = "This paper reports the development and implementation of a model-based cross-directional controller for plastic film extrusion and other web-forming processes. The controller design has a similar structure to that of internal model control (IMC) with the addition of an observer whose gain is designed to minimise process and model mis-match. The observer gain is obtained by solving a multi-objective optimisation through the application of a genetic algorithm and simulation results are presented in this paper demonstrating improvements that can be achieved by the proposed controller over two existing CD controllers.",

author = "Hur, \{Sung Ho\} and Reza Katebi and Andrew Taylor",

year = "2010",

doi = "10.1109/CCA.2010.5611280",

language = "English",

isbn = "9781424453627",

series = "Proceedings of the IEEE International Conference on Control Applications",

pages = "944--949",

booktitle = "2010 IEEE International Conference on Control Applications, CCA 2010",

note = "2010 IEEE International Conference on Control Applications, CCA 2010 ; Conference date: 08-09-2010 Through 10-09-2010",

}

Hur, SH, Katebi, R & Taylor, A 2010, Model-based controller design for a plastic film extrusion process. in 2010 IEEE International Conference on Control Applications, CCA 2010., 5611280, Proceedings of the IEEE International Conference on Control Applications, pp. 944-949, 2010 IEEE International Conference on Control Applications, CCA 2010, Yokohama, Japan, 8/09/10. https://doi.org/10.1109/CCA.2010.5611280

Model-based controller design for a plastic film extrusion process. / Hur, Sung Ho; Katebi, Reza; Taylor, Andrew.
2010 IEEE International Conference on Control Applications, CCA 2010. 2010. p. 944-949 5611280 (Proceedings of the IEEE International Conference on Control Applications).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Model-based controller design for a plastic film extrusion process

AU - Hur, Sung Ho

AU - Katebi, Reza

AU - Taylor, Andrew

PY - 2010

Y1 - 2010

N2 - This paper reports the development and implementation of a model-based cross-directional controller for plastic film extrusion and other web-forming processes. The controller design has a similar structure to that of internal model control (IMC) with the addition of an observer whose gain is designed to minimise process and model mis-match. The observer gain is obtained by solving a multi-objective optimisation through the application of a genetic algorithm and simulation results are presented in this paper demonstrating improvements that can be achieved by the proposed controller over two existing CD controllers.

AB - This paper reports the development and implementation of a model-based cross-directional controller for plastic film extrusion and other web-forming processes. The controller design has a similar structure to that of internal model control (IMC) with the addition of an observer whose gain is designed to minimise process and model mis-match. The observer gain is obtained by solving a multi-objective optimisation through the application of a genetic algorithm and simulation results are presented in this paper demonstrating improvements that can be achieved by the proposed controller over two existing CD controllers.

UR - https://www.scopus.com/pages/publications/78649437892

U2 - 10.1109/CCA.2010.5611280

DO - 10.1109/CCA.2010.5611280

M3 - Conference contribution

AN - SCOPUS:78649437892

SN - 9781424453627

T3 - Proceedings of the IEEE International Conference on Control Applications

SP - 944

EP - 949

BT - 2010 IEEE International Conference on Control Applications, CCA 2010

T2 - 2010 IEEE International Conference on Control Applications, CCA 2010

Y2 - 8 September 2010 through 10 September 2010

ER -

Model-based controller design for a plastic film extrusion process

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this