Moh's hardness Scale and micro vicker's hardness study of bgo and lyso inorganic scintillators

Wuttichai Chaiphaksa; Pruittipol Limkitjaroenporn; Hong Joo Kim; Jakrapong Kaewkhao

doi:10.1088/1742-6596/970/1/012005

Moh's hardness Scale and micro vicker's hardness study of bgo and lyso inorganic scintillators

Wuttichai Chaiphaksa
, Pruittipol Limkitjaroenporn
, Hong Joo Kim
, Jakrapong Kaewkhao

Nakhon Pathom Rajabhat University

Research output: Contribution to journal › Conference article › peer-review

3 Scopus citations

Abstract

BGO and LYSO inorganic scintillation crystals were chosen in this paper for density and hardness properties investigation. Moh's hardness scale was determined by scratching test which of the standard minerals. The micro vicker's hardness was measured with a diamond indenter and the test load was used at 0.1 kgf. The results show that, the moh's hardness scale of LYSO crystal are higher than BGO crystal which correspond with micro vicker's hardness values. The density of scintillation crystals were measured and found to be 7.1 g/cm³ for BGO crystal and 7.15 g/cm³ for LYSO crystal.

Original language	English
Article number	012005
Journal	Journal of Physics: Conference Series
Volume	970
Issue number	1
DOIs	https://doi.org/10.1088/1742-6596/970/1/012005
State	Published - 19 Mar 2018
Event	2017 International Conference on Innovation in Education, Science and Culture, ICIESC 2017 - Medan, Indonesia Duration: 8 Nov 2017 → 9 Nov 2017

Access to Document

10.1088/1742-6596/970/1/012005

Cite this

@article{509b7cae4fab48e6a452664ec0e68991,

title = "Moh's hardness Scale and micro vicker's hardness study of bgo and lyso inorganic scintillators",

abstract = "BGO and LYSO inorganic scintillation crystals were chosen in this paper for density and hardness properties investigation. Moh's hardness scale was determined by scratching test which of the standard minerals. The micro vicker's hardness was measured with a diamond indenter and the test load was used at 0.1 kgf. The results show that, the moh's hardness scale of LYSO crystal are higher than BGO crystal which correspond with micro vicker's hardness values. The density of scintillation crystals were measured and found to be 7.1 g/cm3 for BGO crystal and 7.15 g/cm3 for LYSO crystal.",

author = "Wuttichai Chaiphaksa and Pruittipol Limkitjaroenporn and Kim, \{Hong Joo\} and Jakrapong Kaewkhao",

note = "Publisher Copyright: {\textcopyright} Published under licence by IOP Publishing Ltd.; 2017 International Conference on Innovation in Education, Science and Culture, ICIESC 2017 ; Conference date: 08-11-2017 Through 09-11-2017",

year = "2018",

month = mar,

day = "19",

doi = "10.1088/1742-6596/970/1/012005",

language = "English",

volume = "970",

journal = "Journal of Physics: Conference Series",

issn = "1742-6588",

publisher = "IOP Publishing Ltd.",

number = "1",

}

TY - JOUR

T1 - Moh's hardness Scale and micro vicker's hardness study of bgo and lyso inorganic scintillators

AU - Chaiphaksa, Wuttichai

AU - Limkitjaroenporn, Pruittipol

AU - Kim, Hong Joo

AU - Kaewkhao, Jakrapong

N1 - Publisher Copyright: © Published under licence by IOP Publishing Ltd.

PY - 2018/3/19

Y1 - 2018/3/19

N2 - BGO and LYSO inorganic scintillation crystals were chosen in this paper for density and hardness properties investigation. Moh's hardness scale was determined by scratching test which of the standard minerals. The micro vicker's hardness was measured with a diamond indenter and the test load was used at 0.1 kgf. The results show that, the moh's hardness scale of LYSO crystal are higher than BGO crystal which correspond with micro vicker's hardness values. The density of scintillation crystals were measured and found to be 7.1 g/cm3 for BGO crystal and 7.15 g/cm3 for LYSO crystal.

AB - BGO and LYSO inorganic scintillation crystals were chosen in this paper for density and hardness properties investigation. Moh's hardness scale was determined by scratching test which of the standard minerals. The micro vicker's hardness was measured with a diamond indenter and the test load was used at 0.1 kgf. The results show that, the moh's hardness scale of LYSO crystal are higher than BGO crystal which correspond with micro vicker's hardness values. The density of scintillation crystals were measured and found to be 7.1 g/cm3 for BGO crystal and 7.15 g/cm3 for LYSO crystal.

UR - https://www.scopus.com/pages/publications/85045857123

U2 - 10.1088/1742-6596/970/1/012005

DO - 10.1088/1742-6596/970/1/012005

M3 - Conference article

AN - SCOPUS:85045857123

SN - 1742-6588

VL - 970

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

IS - 1

M1 - 012005

T2 - 2017 International Conference on Innovation in Education, Science and Culture, ICIESC 2017

Y2 - 8 November 2017 through 9 November 2017

ER -

Moh's hardness Scale and micro vicker's hardness study of bgo and lyso inorganic scintillators

Abstract

Access to Document

Other files and links

Fingerprint

Cite this