Numerical analysis of LiFePo4 battery thermal management system using cold plate

Lithium-ion batteries are widely used in electric vehicles because of their high capacity and voltage. However, some drawbacks to the battery stability exist. The aim of our research was to determine the optimum width and number of channels of a cold plate. To estimate the temperature distribution and heat transfer rate, the MSMD (multi-scale multi-dimensional) - Newman P2D model in ANSYS Fluent was used. Prior to comparing the heat transfer rates of the various battery surfaces using different cold plates, the surface temperature of the battery (LiFePO4) at discharge rates of 2C, 3C, and 4C was calculated to determine the battery characteristics. Subsequently, two cold plates were attached to both sides (front and back) of the batteries and the heat transfer rate of the battery surface in contact with the cold plate, and the pressure drop between the inlet and outlet of the channels during the discharge process were estimated. In addition, the j and f factors, which are used to estimate the cooling performance of the cold plates, were calculated. In determining the most efficient cold plate options, the trade-off between the heat transfer coefficient and the pressure drop is also important for the relationship between the two factors (j and f factors).