TY - JOUR
T1 - Parametric evaluation of a hydrofoil-shaped sidewall rib-employed microchannel heat sink with and without nano-encapsulated phase change material slurry as coolant
AU - Mohib Ur Rehman, M.
AU - Cheema, Taqi Ahmad
AU - Khan, Masroor
AU - Abbas, Ahmad
AU - Ali, Haider
AU - Park, Cheol Woo
N1 - Publisher Copyright:
© 2020 Elsevier Ltd
PY - 2020/9
Y1 - 2020/9
N2 - The application of hydrofoil-shaped sidewall ribs (SWRs) in microchannel heat sinks (MCHSs) with nano-encapsulated phase change material (NEPCM) particle slurry as coolant has recently been proven as an improvised solution for enhancing heat transfer, with a reasonable penalty in pressure drop. However, the further mitigation of high-power densities of modern micro/nanoscale devices is limited owing to manufacturing complications and design constraints. By using the geometrical and thermophysical parameters of hydrofoil-shaped SWRs and NEPCM slurry, the present study numerically evaluates the thermal and hydrodynamic performance of an MCHS device. The preliminary results reveal the superior performance of NEPCM slurry with hydrofoil-shaped SWRs compared with that of water without ribs in an MCHS owing to the improved latent heat storage capability of the former fluid as well as the enhanced heat transfer area of the rib structure. Increase in the width and height of hydrofoil-shaped SWRs and particle diameter, latent heat of fusion and mass concentration of the NEPCM slurry at a constant Reynolds number (Re) and inlet temperature enhances heat transfer. However, increase in the pitch of the hydrofoil-shaped SWRs and melting temperature range of the NEPCM slurry degrades heat transfer. The inlet temperature of the NEPCM slurry, with a slightly lower value than the melting point of the NEPCM particles, yields superior performance. The maximum ratios of the Nusselt number, that is, Nuavg,SWR/Nuavg,ref and Nuavg,NEPCM/Nuavg,ref, are 1.88 and 2.68, respectively. A particle loading of more than 10% at a high Re of 1000 is not reasonable from the thermodynamic efficiency perspective. The findings are expected to serve as a benchmark for the selection of the geometric, thermophysical and operational parameters of future MCHS devices with hydrofoil-shaped SWRs and NEPCM slurry as coolant.
AB - The application of hydrofoil-shaped sidewall ribs (SWRs) in microchannel heat sinks (MCHSs) with nano-encapsulated phase change material (NEPCM) particle slurry as coolant has recently been proven as an improvised solution for enhancing heat transfer, with a reasonable penalty in pressure drop. However, the further mitigation of high-power densities of modern micro/nanoscale devices is limited owing to manufacturing complications and design constraints. By using the geometrical and thermophysical parameters of hydrofoil-shaped SWRs and NEPCM slurry, the present study numerically evaluates the thermal and hydrodynamic performance of an MCHS device. The preliminary results reveal the superior performance of NEPCM slurry with hydrofoil-shaped SWRs compared with that of water without ribs in an MCHS owing to the improved latent heat storage capability of the former fluid as well as the enhanced heat transfer area of the rib structure. Increase in the width and height of hydrofoil-shaped SWRs and particle diameter, latent heat of fusion and mass concentration of the NEPCM slurry at a constant Reynolds number (Re) and inlet temperature enhances heat transfer. However, increase in the pitch of the hydrofoil-shaped SWRs and melting temperature range of the NEPCM slurry degrades heat transfer. The inlet temperature of the NEPCM slurry, with a slightly lower value than the melting point of the NEPCM particles, yields superior performance. The maximum ratios of the Nusselt number, that is, Nuavg,SWR/Nuavg,ref and Nuavg,NEPCM/Nuavg,ref, are 1.88 and 2.68, respectively. A particle loading of more than 10% at a high Re of 1000 is not reasonable from the thermodynamic efficiency perspective. The findings are expected to serve as a benchmark for the selection of the geometric, thermophysical and operational parameters of future MCHS devices with hydrofoil-shaped SWRs and NEPCM slurry as coolant.
KW - Heat transfer enhancement
KW - Hydrofoil-shaped sidewall ribs
KW - Microchannel heat sink
KW - Nano encapsulated phase change material slurry
KW - Thermal management
UR - http://www.scopus.com/inward/record.url?scp=85086769066&partnerID=8YFLogxK
U2 - 10.1016/j.applthermaleng.2020.115514
DO - 10.1016/j.applthermaleng.2020.115514
M3 - Article
AN - SCOPUS:85086769066
SN - 1359-4311
VL - 178
JO - Applied Thermal Engineering
JF - Applied Thermal Engineering
M1 - 115514
ER -