Power transmission efficiency analysis of 42 kW power agricultural tractor according to tillage depth during moldboard plowing

Yeon Soo Kim, Wan Soo Kim, Md Abu Ayub Siddique, Seung Yun Baek, Seung Min Baek, Su Hwan Cheon, Sang Dae Lee, Kyeong Hwan Lee, Dong Hyuck Hong, Seong Un Park, Yong Joo Kim

Research output: Contribution to journalArticlepeer-review

18 Scopus citations

Abstract

In order to optimize tractor design and optimize efficiency during tillage operation, it is essential to verify the impact through field tests on factors affecting the tractor load. The objectives of this study were to investigate the effect of tillage depth on power transmission efficiency of 42 kW power agricultural tractor during moldboard plowing. A load measurement system and a tillage depth measurement system were configured for field tests. To analyze the effect of tillage depth on power transmission efficiency and fuel consumption, the data measured in the three-repeated field test were classified according to tillage depth. As the tillage depth increased from 11 cm at the top of the hardpan to 23 cm at the deepest, the required power of the engine increased by approximately 13% from 35.48 kW to 40.11 kW, and the power transmission efficiency also increased significantly from 66% to 95%. Among them, the power transmission efficiency of the rear axle was significantly increased from 38% to 59%, which was the most affected. As the tillage depth increased, the overall power requirement is greatly increased due to the resulting workload, but the fuel consumption and the specific fuel consumption are reduced because the engine speed of the tractor is reduced. As the tillage depth increased from 11 cm to 23 cm, the fuel consumption rate was rather reduced by 13.5% as the engine rotational speed decreased 11.3% due to the increase work load of tractor. In addition, the specific fuel consumption decreased from 302.44 g/kWh to 236.93 g/kWh, showing a fuel consumption saving of up to 21.7% during moldboard plow. In addition, as the tillage depth increased, the ratio of the value excluding the mechanical and hydraulic power requirements has significantly decreased from 34% to 5% as the power transmission efficiency increases. This study considers the soil properties according to the soil depth, as well as the power transmission efficiency and fuel consumption rate. The research results can provide useful information for research on power transmission efficiency and selection of an appropriate power source of agricultural tractor according to tillage depth during moldboard plowing and are expected to be used in various ways as basic studies of digital farming research in agricultural machinery.

Original languageEnglish
Article number1263
JournalAgronomy
Volume10
Issue number9
DOIs
StatePublished - Sep 2020

Keywords

  • Agricultural tractor
  • Fuel efficiency
  • Moldboard plowing
  • Power requirements
  • Power transmission efficiency
  • Tillage depth

Fingerprint

Dive into the research topics of 'Power transmission efficiency analysis of 42 kW power agricultural tractor according to tillage depth during moldboard plowing'. Together they form a unique fingerprint.

Cite this