Ring-rolling process for manufacturing Ti-6Al-4V plane and profiled ring-products

K. J. Kim; S. S. Choi; C. Y. Hwang; J. S. Kim; J. T. Yeom; C. S. Lee

doi:10.4028/0-87849-463-4.429

Ring-rolling process for manufacturing Ti-6Al-4V plane and profiled ring-products

K. J. Kim, S. S. Choi, C. Y. Hwang, J. S. Kim, J. T. Yeom, C. S. Lee

Department of Nano & Advanced Materials Science and Engineering

Research output: Contribution to journal › Conference article › peer-review

2 Scopus citations

Abstract

Manufacturing processes of Ti-6A1-4V plane and profiled ring-products were investigated with three-dimensional FEM simulation and experimental analyses. FEM simulation for the ring-rolling process was used to calculate the state variables such as strain, strain rate and temperature. To induce the uniform deformation of the profile ring and reduce the applied load, the final blank was prepared by two-step processes. The mechanical properties of Ti-6A1-4V alloy ring products made in this work were investigated with tensile and impact tests, and compared with the specification(AMS-T-81915).

Original language	English
Pages (from-to)	429-432
Number of pages	4
Journal	Advanced Materials Research
Volume	24-25
DOIs	https://doi.org/10.4028/0-87849-463-4.429
State	Published - 2007
Event	PRICM 6: The 6th Pacific Rim International Conference on Advanced Materials and Processing - Jeju Island, Korea, Republic of Duration: 5 Nov 2007 → 9 Nov 2007

Keywords

Plane Ti-6Al-4V ring
Profiled Ti-6Al-4V ring
Ring rolling process
Three-dimensional FEM simulation

Access to Document

10.4028/0-87849-463-4.429

Cite this

@article{ff574d7a2f9d4f14a34cdd778025e9ab,

title = "Ring-rolling process for manufacturing Ti-6Al-4V plane and profiled ring-products",

abstract = "Manufacturing processes of Ti-6A1-4V plane and profiled ring-products were investigated with three-dimensional FEM simulation and experimental analyses. FEM simulation for the ring-rolling process was used to calculate the state variables such as strain, strain rate and temperature. To induce the uniform deformation of the profile ring and reduce the applied load, the final blank was prepared by two-step processes. The mechanical properties of Ti-6A1-4V alloy ring products made in this work were investigated with tensile and impact tests, and compared with the specification(AMS-T-81915).",

keywords = "Plane Ti-6Al-4V ring, Profiled Ti-6Al-4V ring, Ring rolling process, Three-dimensional FEM simulation",

author = "Kim, {K. J.} and Choi, {S. S.} and Hwang, {C. Y.} and Kim, {J. S.} and Yeom, {J. T.} and Lee, {C. S.}",

year = "2007",

doi = "10.4028/0-87849-463-4.429",

language = "English",

volume = "24-25",

pages = "429--432",

journal = "Advanced Materials Research",

issn = "1022-6680",

publisher = "Trans Tech Publications",

note = "PRICM 6: The 6th Pacific Rim International Conference on Advanced Materials and Processing ; Conference date: 05-11-2007 Through 09-11-2007",

}

TY - JOUR

T1 - Ring-rolling process for manufacturing Ti-6Al-4V plane and profiled ring-products

AU - Kim, K. J.

AU - Choi, S. S.

AU - Hwang, C. Y.

AU - Kim, J. S.

AU - Yeom, J. T.

AU - Lee, C. S.

PY - 2007

Y1 - 2007

N2 - Manufacturing processes of Ti-6A1-4V plane and profiled ring-products were investigated with three-dimensional FEM simulation and experimental analyses. FEM simulation for the ring-rolling process was used to calculate the state variables such as strain, strain rate and temperature. To induce the uniform deformation of the profile ring and reduce the applied load, the final blank was prepared by two-step processes. The mechanical properties of Ti-6A1-4V alloy ring products made in this work were investigated with tensile and impact tests, and compared with the specification(AMS-T-81915).

AB - Manufacturing processes of Ti-6A1-4V plane and profiled ring-products were investigated with three-dimensional FEM simulation and experimental analyses. FEM simulation for the ring-rolling process was used to calculate the state variables such as strain, strain rate and temperature. To induce the uniform deformation of the profile ring and reduce the applied load, the final blank was prepared by two-step processes. The mechanical properties of Ti-6A1-4V alloy ring products made in this work were investigated with tensile and impact tests, and compared with the specification(AMS-T-81915).

KW - Plane Ti-6Al-4V ring

KW - Profiled Ti-6Al-4V ring

KW - Ring rolling process

KW - Three-dimensional FEM simulation

UR - http://www.scopus.com/inward/record.url?scp=57649094194&partnerID=8YFLogxK

U2 - 10.4028/0-87849-463-4.429

DO - 10.4028/0-87849-463-4.429

M3 - Conference article

AN - SCOPUS:57649094194

SN - 1022-6680

VL - 24-25

SP - 429

EP - 432

JO - Advanced Materials Research

JF - Advanced Materials Research

T2 - PRICM 6: The 6th Pacific Rim International Conference on Advanced Materials and Processing

Y2 - 5 November 2007 through 9 November 2007

ER -

Ring-rolling process for manufacturing Ti-6Al-4V plane and profiled ring-products

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this