Synthesis and characterization of nano-particulate BaTiO 3 for ceramic/polymer composite capacitor

Duk Kyu Lee; Dong Wan Kim; In Sun Cho; Sangwook Lee; Junhong Noh; Kug Sun Hong

doi:10.1166/jnn.2010.1848

Synthesis and characterization of nano-particulate BaTiO ₃ for ceramic/polymer composite capacitor

Duk Kyu Lee
, Dong Wan Kim
, In Sun Cho
, Sangwook Lee
, Junhong Noh
, Kug Sun Hong

Seoul National University
Dongil Technology Ltd
Ajou University

Research output: Contribution to journal › Article › peer-review

9 Scopus citations

Abstract

BaTiO ₃ nano-particles with a size range of 20-70 nm were synthesized at 70 °C through a simple wet-chemical reactions between barium hydroxide octahydrate (Ba(OH) ₂ ? 8H ₂O) and meta titanic acid (H ₂TiO ₃) in ethanol/water mixed solvent systems. It was found that the volume ratio of ethanol to deionized water is a key controlling parameter to determine the phase formation and particle size of BaTiO ₃. Single-phase cubic perovskite BaTiO ₃ started to be formed in solution containing above 40 volume percent of ethanol. From the field emission scanning electron microscopy (FE- SEM) and transmission electron microscopy (TEM) analysis, the as-prepared BaTiO ₃ exhibited the aggregated morphologies. The surface properties were characterized by the nitrogen adsorption isotherms curves. The effects of these aggregates on the electrical performance in BaTiO ₃/epoxy nano-composites were also examined.

Original language	English
Pages (from-to)	1361-1366
Number of pages	6
Journal	Journal of Nanoscience and Nanotechnology
Volume	10
Issue number	2
DOIs	https://doi.org/10.1166/jnn.2010.1848
State	Published - Feb 2010

Keywords

Aggregates
BaTiO
Dielectric properties
Nano-composite
Nano-particles
Synthesis

Access to Document

10.1166/jnn.2010.1848

Cite this

@article{83f4fa0c3e5f4a638424ddc10efca272,

title = "Synthesis and characterization of nano-particulate BaTiO 3 for ceramic/polymer composite capacitor",

abstract = "BaTiO 3 nano-particles with a size range of 20-70 nm were synthesized at 70 °C through a simple wet-chemical reactions between barium hydroxide octahydrate (Ba(OH) 2 ? 8H 2O) and meta titanic acid (H 2TiO 3) in ethanol/water mixed solvent systems. It was found that the volume ratio of ethanol to deionized water is a key controlling parameter to determine the phase formation and particle size of BaTiO 3. Single-phase cubic perovskite BaTiO 3 started to be formed in solution containing above 40 volume percent of ethanol. From the field emission scanning electron microscopy (FE- SEM) and transmission electron microscopy (TEM) analysis, the as-prepared BaTiO 3 exhibited the aggregated morphologies. The surface properties were characterized by the nitrogen adsorption isotherms curves. The effects of these aggregates on the electrical performance in BaTiO 3/epoxy nano-composites were also examined.",

keywords = "Aggregates, BaTiO, Dielectric properties, Nano-composite, Nano-particles, Synthesis",

author = "Lee, \{Duk Kyu\} and Kim, \{Dong Wan\} and Cho, \{In Sun\} and Sangwook Lee and Junhong Noh and Hong, \{Kug Sun\}",

year = "2010",

month = feb,

doi = "10.1166/jnn.2010.1848",

language = "English",

volume = "10",

pages = "1361--1366",

journal = "Journal of Nanoscience and Nanotechnology",

issn = "1533-4880",

publisher = "American Scientific Publishers",

number = "2",

}

TY - JOUR

T1 - Synthesis and characterization of nano-particulate BaTiO 3 for ceramic/polymer composite capacitor

AU - Lee, Duk Kyu

AU - Kim, Dong Wan

AU - Cho, In Sun

AU - Lee, Sangwook

AU - Noh, Junhong

AU - Hong, Kug Sun

PY - 2010/2

Y1 - 2010/2

N2 - BaTiO 3 nano-particles with a size range of 20-70 nm were synthesized at 70 °C through a simple wet-chemical reactions between barium hydroxide octahydrate (Ba(OH) 2 ? 8H 2O) and meta titanic acid (H 2TiO 3) in ethanol/water mixed solvent systems. It was found that the volume ratio of ethanol to deionized water is a key controlling parameter to determine the phase formation and particle size of BaTiO 3. Single-phase cubic perovskite BaTiO 3 started to be formed in solution containing above 40 volume percent of ethanol. From the field emission scanning electron microscopy (FE- SEM) and transmission electron microscopy (TEM) analysis, the as-prepared BaTiO 3 exhibited the aggregated morphologies. The surface properties were characterized by the nitrogen adsorption isotherms curves. The effects of these aggregates on the electrical performance in BaTiO 3/epoxy nano-composites were also examined.

AB - BaTiO 3 nano-particles with a size range of 20-70 nm were synthesized at 70 °C through a simple wet-chemical reactions between barium hydroxide octahydrate (Ba(OH) 2 ? 8H 2O) and meta titanic acid (H 2TiO 3) in ethanol/water mixed solvent systems. It was found that the volume ratio of ethanol to deionized water is a key controlling parameter to determine the phase formation and particle size of BaTiO 3. Single-phase cubic perovskite BaTiO 3 started to be formed in solution containing above 40 volume percent of ethanol. From the field emission scanning electron microscopy (FE- SEM) and transmission electron microscopy (TEM) analysis, the as-prepared BaTiO 3 exhibited the aggregated morphologies. The surface properties were characterized by the nitrogen adsorption isotherms curves. The effects of these aggregates on the electrical performance in BaTiO 3/epoxy nano-composites were also examined.

KW - Aggregates

KW - BaTiO

KW - Dielectric properties

KW - Nano-composite

KW - Nano-particles

KW - Synthesis

UR - https://www.scopus.com/pages/publications/77954986684

U2 - 10.1166/jnn.2010.1848

DO - 10.1166/jnn.2010.1848

M3 - Article

AN - SCOPUS:77954986684

SN - 1533-4880

VL - 10

SP - 1361

EP - 1366

JO - Journal of Nanoscience and Nanotechnology

JF - Journal of Nanoscience and Nanotechnology

IS - 2

ER -

Synthesis and characterization of nano-particulate BaTiO ₃ for ceramic/polymer composite capacitor

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this