The effect of fillers on rubber characteristics for gasket to lithium ion battery

Kwan Ho Seo; Kwang Soo Cho; In Sub Yun; Woo Hyuk Choi; Byung Ki Hur; Dong Gug Kang

doi:10.7317/pk.2010.34.5.430

The effect of fillers on rubber characteristics for gasket to lithium ion battery

Kwan Ho Seo, Kwang Soo Cho, In Sub Yun, Woo Hyuk Choi, Byung Ki Hur, Dong Gug Kang

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

The gasket materials of for the lithium ion battery requires chemical resistance to electrolyte, electrical insulating, compression set, anti-contamination and low temperature property. To check the special characteristics of fillers which are applied to rubber for gasket, compound of EPDM, NBR and FKM (fluoro elastomer) were made by adjusting weights of carbon black and silica additive. Using these compounds, we had done tests of long-term stability against electrolyte, compression set and low-temperature property with considering operating condition of the lithium ion battery. From this test, we investigated the physical and chemical characteristics of rubber with using of carbon black and silica additive in each.

Original language	English
Pages (from-to)	430-433
Number of pages	4
Journal	Polymer (Korea)
Volume	34
Issue number	5
DOIs	https://doi.org/10.7317/pk.2010.34.5.430
State	Published - Sep 2010

Keywords

Carbon black
EPDM
FKM
Lithium ion battery
NBR
Silica additive

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.7317/pk.2010.34.5.430

Cite this

@article{c2be7f78ef344c429a2001c3cfb8752a,

title = "The effect of fillers on rubber characteristics for gasket to lithium ion battery",

abstract = "The gasket materials of for the lithium ion battery requires chemical resistance to electrolyte, electrical insulating, compression set, anti-contamination and low temperature property. To check the special characteristics of fillers which are applied to rubber for gasket, compound of EPDM, NBR and FKM (fluoro elastomer) were made by adjusting weights of carbon black and silica additive. Using these compounds, we had done tests of long-term stability against electrolyte, compression set and low-temperature property with considering operating condition of the lithium ion battery. From this test, we investigated the physical and chemical characteristics of rubber with using of carbon black and silica additive in each.",

keywords = "Carbon black, EPDM, FKM, Lithium ion battery, NBR, Silica additive",

author = "Seo, {Kwan Ho} and Cho, {Kwang Soo} and Yun, {In Sub} and Choi, {Woo Hyuk} and Hur, {Byung Ki} and Kang, {Dong Gug}",

year = "2010",

month = sep,

doi = "10.7317/pk.2010.34.5.430",

language = "English",

volume = "34",

pages = "430--433",

journal = "Polymer (Korea)",

issn = "0379-153X",

publisher = "Polymer Society of Korea",

number = "5",

}

TY - JOUR

T1 - The effect of fillers on rubber characteristics for gasket to lithium ion battery

AU - Seo, Kwan Ho

AU - Cho, Kwang Soo

AU - Yun, In Sub

AU - Choi, Woo Hyuk

AU - Hur, Byung Ki

AU - Kang, Dong Gug

PY - 2010/9

Y1 - 2010/9

N2 - The gasket materials of for the lithium ion battery requires chemical resistance to electrolyte, electrical insulating, compression set, anti-contamination and low temperature property. To check the special characteristics of fillers which are applied to rubber for gasket, compound of EPDM, NBR and FKM (fluoro elastomer) were made by adjusting weights of carbon black and silica additive. Using these compounds, we had done tests of long-term stability against electrolyte, compression set and low-temperature property with considering operating condition of the lithium ion battery. From this test, we investigated the physical and chemical characteristics of rubber with using of carbon black and silica additive in each.

AB - The gasket materials of for the lithium ion battery requires chemical resistance to electrolyte, electrical insulating, compression set, anti-contamination and low temperature property. To check the special characteristics of fillers which are applied to rubber for gasket, compound of EPDM, NBR and FKM (fluoro elastomer) were made by adjusting weights of carbon black and silica additive. Using these compounds, we had done tests of long-term stability against electrolyte, compression set and low-temperature property with considering operating condition of the lithium ion battery. From this test, we investigated the physical and chemical characteristics of rubber with using of carbon black and silica additive in each.

KW - Carbon black

KW - EPDM

KW - FKM

KW - Lithium ion battery

KW - NBR

KW - Silica additive

UR - http://www.scopus.com/inward/record.url?scp=77957909791&partnerID=8YFLogxK

U2 - 10.7317/pk.2010.34.5.430

DO - 10.7317/pk.2010.34.5.430

M3 - Article

AN - SCOPUS:77957909791

SN - 0379-153X

VL - 34

SP - 430

EP - 433

JO - Polymer (Korea)

JF - Polymer (Korea)

IS - 5

ER -

The effect of fillers on rubber characteristics for gasket to lithium ion battery

Abstract

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this